Label Multiple Disks by Using the prtvtoc and fmthard Commands
Use the prtvtoc and fmthard commands
to label multiple disks with the same disk geometry.
Use the following for loop in a script to copy a
disk label from one disk and replicate it on multiple disks.
# for i in x y z
> do
> prtvtoc /dev/rdsk/cwtxdysz | fmthard -s - /dev/rdsk/cwt${i}d0s2
> done
|
Example--Labeling Multiple Disks
In this example, the disk label from c2t0d0s0 is
copied to four other disks.
# for i in 1 2 3 5
> do
> prtvtoc /dev/rdsk/c2t0d0s0 | fmthard -s - /dev/rdsk/c2t${i}d0s2
> done
fmthard: New volume table of contents now in place.
fmthard: New volume table of contents now in place.
fmthard: New volume table of contents now in place.
fmthard: New volume table of contents now in place.
#
|
| 
Previous