|
|||
|
 |
|
  |
|
  |
|
| |||||||||||||||
Where to Go From HereAfter you create disk slices and label the disk, you can create file systems on the disk. Go to SPARC: How to Create File Systems.
|
# newfs /dev/rdsk/cwtxdysz |
/dev/rdsk/cwtxdysx is the raw device for the file system to be created.
For more information about the newfs command, see Chapter 39, Creating File Systems (Tasks) or newfs(1M).
Verify the new file system by mounting.
# mount /dev/dsk/cwtxdysz /mnt # ls lost+found |
Add Disk Task | Action |
|---|---|
System Disk | You need to restore the root (/) and /usr file systems on the disk. Go to Chapter 49, Restoring Files and File Systems (Tasks). After the root (/) and /usr file systems are restored, install the boot block. Go to SPARC: How to Install a Boot Block on a System Disk. |
Secondary Disk | You might need to restore file systems on the new disk. Go to Chapter 49, Restoring Files and File Systems (Tasks).
If you are not restoring file systems on the new disk, you are finished adding a secondary disk. See Chapter 40, Mounting and Unmounting File Systems (Tasks) for information on making the file systems available to users. |
SPARC: How to Install a Boot Block on a System DiskBecome superuser or assume an equivalent role.
Install a boot block on the system disk.
# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/cwtxdys0 |
/usr/platform/`uname -i`/lib/fs /ufs/bootblk | Is the boot block code. |
/dev/rdsk/cwtxdys0 | Is the raw device of the root (/) file system. |
For more information, see installboot(1M).
Verify that the boot blocks are installed by rebooting the system to run level 3.
# init 6 |
The following example shows how to install the boot block on an Ultra10 system.
# installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c0t0d0s0 |
 Previous Contents Index Next  |