Input Methods and Conversion Modes for Entering Text

The following input methods and conversion modes are available for entering ASCII/English, Simplified Chinese and other text:

In In zh/zh_CN/zh_CN.EUC locale:

• NewQuanPin input method, the default method (F2).

• NewShuangPin input method (F3).

• QuanPin input method (F4).

• ShuangPin input method (F5).

• GB2312 NeiMa input method (F6).

• English_Chinese Input method (F7).

In zh.GBK/zh_CN.GBK locales:

• NewQuanPin input method, the default method (F2).

• NewShuangPin input method (F3).

• QuanPin input method (F4).

• ShuangPin input method (F5).

• GBK NeiMa input method (F6).

• English_Chinese Input method (F7).

In zh_CN.GB18030/zh.UTF-8/zh_CN.UTF-8 locales:

• NewQuanPin input method, the default method (F2).

• NewShuangPin input method (F3).

• QuanPin input method (F4).

• ShuangPin input method (F5).

• GB18030 NeiMa input method (F6).

• English_Chinese Input method (F7).

Press Control-spacebar to toggle on or off the Simplified Chinese input conversion. The function keys listed above (for example: F2, F3) turn on the corresponding input methods.

Typing ASCII Text

Each tool first starts with all Simplified Chinese input modes off, the window's status area blank. This mode is for typing ASCII text:

Simplified Chinese input conversion mode is toggled on and off by pressing Control-spacebar. After Simplified Chinese input conversion has been turned on once and input conversion is then turned off, the status area is no longer blank, but instead shows that conversion is off.

Switching Between English Status and Chinese Status:

• Type "CTRL+SPACE".

  An auxiliary window appears, as shown below:

Select Input Method

• In the Chinese status window, type Function key "Fn". For example, type F2 to switch to the first input method. F3 to switch to the second input nethod, and so on. OR click the input mehtod selection button on the auxiliary window.

  The input method selection menu appears as below:

Toggling Input Methods

This procedure allows you to toggle between 6 imput methods. Text is entered in the Chinese status window.

1. Type "CTRL+ESC" to switch input methods.

Switching Between Half_width Character Mode and Full_width Character Mode

This method is entered in the Chinese status window.

1. Type "SHIFT+SPACE" to switch between Half_width Character Mode and Full_width Character Mode. OR click the Half_width/Full_width button of auxiliary window to toggle between modes.

The indicates the input method system is in Half_width Character Mode.

The indicates the input method system is in Full_width Character Mode.

When in Full_width mode, the Full_width character of the input key will be commit to system. For example: if you input 'a' when in Full_width mode, the fullwidth character of 'a' is commited to the application as in the figure below: